|
90 Deg. Tilt and Swivel Mast Mounting Kit Dish Antenna |
| Mounting Kit for mounting to 1-1/4" to 2-1/2" dia. masts. With |
| 5" x 5" (127 x 127 mm) wide mounting flange |
| This kit contains: |
| Zinc Plated and powder coated Steel Antenna Mounting Bracket with positioning slot |
| Zinc Plated and powder coated Steel V slot Base |
| Stainless Steel M8 x 60 mm Hex bolt with Nut and washer for fixing the angle |
| Zinc Plated and powder coated Steel arm for dish reflector slot Base |
| Nylon Ring for Dish relater profile match |
|
| |
 |
|
60 Degree Tilt and Swivel Mast Mounting Kit |
| Mounting Kit for mounting to 1-1/4" to 2" dia. masts. |
| This kit contains: |
| Zinc Plated and powder coated Steel Antenna Mounting Bracket with positioning slot |
| Zinc Plated Steel 1/4-20 x 2" U-Bolt with spring & plain Washer and nuts |
| Adisnal if need Zinc Plated and powder coated Steel U-Bolt Base |
| 4 nos Stainless Steel M6 x 25 Pan Head Screws |
|
|
|
Universal Weatherproof enclosure mounting kit |
| Antenna and enclosure Mount features a 35 degree Adjustable on all axis |
| mounting to 1-1/4" to 2" dia. Masts and wall |
| This kit contains: |
| Zinc Plated and powder coated Steel body |
| Zinc Plated and powder coated Steel V-Slot Base |
| Stainless Steel M8 x 80 mm Hex bolt with Nut and washer |
| Stainless Steel M8 x 10 mm Hex bolt for angle adjustment |
|
|
|
Universal Weatherproof enclosure mounting kit |
| Antenna and enclosure Mount kit features a 45 degree Adjustable on all axis |
| 1st 360 deg, on horizontally with single nut fixing |
| mounting to 1-1/4" to 2" dia. Masts and wall |
| This kit contains: |
| Zinc Plated and powder coated Steel body |
| Zinc Plated and powder coated Steel V-Slot Base |
| Stainless Steel M8 x 80 mm Hex bolt with Nut and washer |
|
|
|
Sector antenna mount Kit |
| for secure mounting sectorial antennas to withstand wind, weight and vibrations. Includes safety wire fasteners. |
| Clamp material: Stainless steel |
| This kit contains: |
| Top and bottom Clam Body |
| V slot Base |
| Stainless Steel M8 x 80 mm Hex bolt with Nut and washer |
| Stainless Steel M6 x 10 mm Hex bolt for Enclosure Fixing |
|
|
|
Universal Weatherproof enclosure mounting kit Arm Type |
| Antenna and enclosure Mount features a 35 degree Adjustable on x,y,z axis |
| mounting to 1-1/4" to 2" dia. Masts and wall |
| This kit contains: |
| Zinc Plated and powder coated Steel body |
| Zinc Plated and powder coated Steel V-Slot Base |
| Stainless Steel M8 x 80 mm Hex bolt with Nut and washer |
| Stainless Steel M8 x 10 mm Hex bolt for angle adjustment |
|
|
|
Omni antennas mounting kit |
| Omni antena mount on wall/vihical or poll |
| This kit contains: |
| Zinc Plated and powder coated Steel body |
| Stainless Steel M6 x 25 mm Hex bolt with Nut and washer |
|
|
|
Universal Weatherproof enclosure mounting kit Arm Type |
| Antenna and camera Mount features a 35 degree Adjustable on x,y,z axis |
| mounting to 1-1/4" to 2" dia. Masts and wall |
| This kit contains: |
| Zinc Plated and powder coated Steel body |
| Zinc Plated and powder coated Steel V-Slot Base |
| Stainless Steel M8 x 80 mm Hex bolt with Nut and washer |
| Stainless Steel M8 x 10 mm Hex bolt for angle adjustment |
|
|
|
Liquid Tight Cable Glands - PG-11, PG-13.5, PG-16 |
| Available in three sizes, PG-11, PG-13.5 and PG-16. |
| SUNDOOR liquid tight cable glands are perfect for use with enclosures |
| where liquids and moisture are present at the cable egress point. |
| Liquid-tight |
| Nylon construction with neoprene seal and lock nut |
| Flame retardant, self extinguishing |
| Oil, grease and salt water resistant |
|
|
| |
